
Why Does My Net Wrap Keep Tearing? Common Baler Net Wrap Problems, Solved
Torn net wrap almost always traces back to one of a handful of causes — most of them fixable in a few minutes without a parts order.
July 24, 2026
Torn or jammed net wrap is frustrating mid-field, but the causes are a short, well-known list. Work through these before assuming you've got a bad roll.
Roll loaded backward
By far the most common cause. Net wrap is directional, and a roll loaded with the wrong orientation will feed unevenly and tear within the first few feet. If tearing happens right at the start of a fresh roll, check the loading direction first — TD Strong and TD Edge+ rolls carry a color bar indicator down each side specifically so operators can confirm left/right orientation before closing the chamber. See our step-by-step loading guide for the full process.
Worn or misadjusted feed rollers and brake
Feed rollers wear down over a season, and a brake tensioner that's too tight will strain the wrap as it feeds, while one that's too loose lets the roll overrun and bunch up. Inspect rollers for wear grooves and confirm brake tension against spec at the start of each season.
Debris buildup in the wrap chamber
Chaff and dust accumulate in the wrap chamber over time and can snag the netting as it feeds. A quick chamber clean-out at the start of the day, especially in dusty or dry conditions, prevents a surprising share of mid-season tears.
Wrong width for the chamber
Wrap that's narrower or wider than your bale chamber doesn't sit flat against the rollers the way it's designed to, and it's more prone to tearing at the edges. Double-check your width against our sizing guide if tearing started after switching suppliers or roll batches — our Tailor-Made service can also build an exact-width roll if none of the standard sizes fit cleanly.
Under-spec breaking strength for the crop
Not all net wrap is built to the same breaking strength. TD Basic is rated at 270–280 kg, which is plenty for standard hay, but dense silage or an older baler working near the limit of its capacity puts more strain on the wrap. TD Strong (280–300 kg), TD Super Strong (300–320 kg), and TD Edge+ (290–320 kg, with wider coverage and stronger UV resistance) all step up strength and coverage for exactly these situations — if you're consistently tearing wrap on high-density bales, moving up a tier is usually the fix, not a different brand of the same tier.
Storage and UV exposure
Every roll in the TD range is rated for a minimum 12 months of UV resistance, with higher resistance available on request for operations that store rolls outdoors for extended periods. Rolls stored well past their rated UV window, or left exposed to direct sun for months before use, are more likely to feed poorly and tear — rotate stock and store unused rolls under cover when possible.
Still tearing?
If you've ruled out all of the above, the issue is usually the wrap's spec, not the machine — see our wholesale and tailor-made guide, or reach out for a quote on a higher-strength or custom-spec roll for your baler.
