Tiandi China, Since 1997Tiandi China, Since 1997

Net Wrap Width and Length Guide: Choosing the Right Roll for Your Baler

Net wrap rolls come in a handful of standard widths and lengths, plus tailor-made options outside that range. Here's what each spec means and how to match it to your baler.

/NewsNet Wrap Width and Length Guide: Choosing the Right Roll for Your Baler

July 24, 2026

Net wrap is sold by two specs that matter more than any brand name: width and roll length. Get either one wrong and you'll either have wrap that doesn't fully cover the bale face, or a roll that runs out mid-season faster than expected.

Width: matching your baler's chamber

Net wrap width needs to match — or very slightly exceed — the width of your baler's bale chamber so the wrap covers the full bale face edge to edge. Our standard TD Basic, TD Strong, TD Super Strong, and TD Edge+ rolls run:

  • 1.23 m — a common mid-frame chamber width
  • 1.25 m — the most widely used width across the range
  • 1.30 m — wider-chamber balers

In imperial terms these correspond roughly to the 48"–51" band most farmers already think in. If your baler runs a wider 64"–67" chamber, or any non-standard width from 0.76 m up to 1.70 m and beyond, our Tailor-Made Baler Netwrap service builds to that exact spec instead of forcing a standard roll to fit. Running wrap that's too narrow leaves the bale ends exposed to weather; wrap that's too wide wastes material and can cause feeding issues at the rollers — see our brand-by-brand compatibility guide for a starting point on chamber width.

Roll length: balancing changeovers against storage

Roll length is where the real cost and logistics tradeoffs live. Standard TD rolls come in 2,000 m, 2,600 m, and 3,000 m lengths (roughly 6,560 ft to 9,840 ft), and Tailor-Made rolls can be built up to 3,600 m for operations that want fewer mid-field roll changes. The tradeoff is simple: longer length netwrap rolls mean fewer roll changes per season, so a 3,000 m roll costs more per roll but less in stopped baler time than a 2,000 m one.

  • Shorter rolls (2,000 m) are easier to handle and store, and lower the cost of a single roll if it's damaged or contaminated
  • Longer rolls (3,000–3,600 m) cut down on mid-field roll changes, which matters most on high-acreage operations running balers for long stretches without stopping

Every roll in the TD range carries a guaranteed length under our one-year quality guarantee, so you can plan bales-per-roll without padding for shrinkage. A rough rule of thumb: divide the roll length by the average wraps-per-bale (2–3 for dry hay) and again by the average bale circumference to estimate bales per roll.

Reading the spec label

Net wrap rolls are typically labeled as width by length (for example, "1.25 m x 3,000 m"), sometimes alongside a breaking-strength rating. If a supplier doesn't list both numbers clearly, ask before you buy — undersized or mislabeled rolls are one of the most common causes of net wrap tearing and feeding problems.

Not sure which width or length fits your baler, or need something outside the standard range? Our team can confirm the right spec or scope a tailor-made roll for your machine and crop.

Related reading